Transducer 1/2 inch chain cutter nozzle This sewer hose is generally

This sewer hose is generally used on jetters ranging from 2000-3000 PSI at 50+ GPM and performs best in 12"-48" pipes

and slowly squeeze fluid into swivel until excess fluid comes out around the inlet end

The Roller is designed to span the manhole ring with an angled tab to secure the roller unit into position

*Blow out all water with compressed air before storing tool

extending its lifespan

Transducer 1/2 inch chain cutter nozzle This sewer hose is generallyThe transducer is a high pressure water sensor that connects to the water manifold block. It reads the water pressure and allows the remote control panel to display the pressure the jetting machine is running at. The J 022 100 S snubber attaches to the transducer and acts as a filter which is why they are always recommended to be replaced together. The type of transducer used depends on the type of control panel on the jetting machine. For the JMS